Tools | Quick Contact | Cart | Language
America
Europe
Asia Pacific

## Introduction

1 mF = 0.001 F = 1e-3 F

To convert millifarads (mF) to farads (F), you need to consider the relationship between these units.

The formula for the conversion is:

For instance, if you have 5 millifarads and want to convert it to farads:

Farads (F) is the standard unit of measurement for capacitance in the International System of Units (SI). It represents the ability of a capacitor to store an electrical charge. One farad is a relatively large unit of capacitance. It's defined as one coulomb of electric charge per volt of electrical potential difference. Capacitance is a property of a capacitor and represents its ability to store electrical energy in an electric field. The greater the capacitance, the more charge a capacitor can store for a given voltage.

In many practical applications, capacitance values are often expressed in smaller units such as microfarads (μF), nanofarads (nF), or picofarads (pF), especially for smaller electronic components where the farad unit is too large. For example, one microfarad is equal to 10-6 farads, one nanofarad is equal to 10-9 farads, and one picofarad is equal to 10-12 farads.

Millifarads (mF) is a unit of capacitance in the metric system. It represents a smaller measurement of capacitance within the context of electrical engineering. 1 farad (F) is a standard unit of capacitance in the International System of Units (SI). A millifarad is equal to 10-3 or one-thousandth of a farad. This means that one farad is equivalent to 1000 millifarads.

Capacitors with high capacitance are often represented in farads. However, in many practical applications, especially with smaller capacitors, capacitance is commonly expressed in smaller units such as microfarads (μF), nanofarads (nF), or millifarads (mF). For instance, a capacitor with a capacitance of 0.001 farads can also be expressed as 1 millifarad (1 mF).

## MF to F Conversion Table

Below is a conversion table that shows the conversion of millifarads (mF) to farads (F)
1 mF = 0.001 F
2 mF = 0.002 F
3 mF = 0.003 F
4 mF = 0.004 F
5 mF = 0.005 F
6 mF = 0.006 F
7 mF = 0.007 F
8 mF = 0.008 F
9 mF = 0.009 F
10 mF = 0.01 F
15 mF = 0.015
20 mF = 0.02 F
25 mF = 0.025
50 mF = 0.05 F
75 mF = 0.075
100 mF = 0.1 F
250 mF = 0.25
500 mF = 0.5 F
750 mF = 0.75
1000 mF = 1 F Nantian Electronics a professional distributor of electronic components, providing a wide range of electronic products, saving you a lot of time, effort and cost through our meticulous order preparation and fast delivery service.

## FAQ

"uF" is a symbol representing microfarads in the context of capacitance. It stands for microfarads, where "u" is a symbol used to denote "micro-" in the International System of Units (SI).

Microfarads (µF) are a smaller unit of capacitance. One microfarad is equivalent to 10-6 farads. This unit is commonly used to measure the capacitance of electronic components like capacitors in many electrical circuits and devices.

Therefore, "uF" is associated with microfarads, not millifarads, in the realm of capacitance measurements.

The prefix "milli-" represents one-thousandth of a whole unit. So, "millifarad" denotes a fraction of a farad. Therefore, 1 millifarad is equivalent to 10-3 farads.